Advancing Selective Plating . . . and Moving Beyond
Search: GO
Request InformationContact UsHome
 
ISO 9001 | AS 9100Nadcap
All Categories > Plating Products and Solutions > Auxiliary Plating Equipment > ID Plater > Item # 10601000  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 10601000, Variable Speed ID Plater


ID Plater Variable Speed, 230 VAC, 50/60 Hz





Specifications

Drive Unit
95 watt variable speed, 3 to 122 rpm full load torque 5.2 Nm

Leaf Springs (total of six)
Set 1 - For 102 to 178 mm ID (Designated "S")
Set 2 - For 178 to 254 mm ID (Designated "M")
Set 3 - For 229 to 305 mm ID (Designated "L")

Flow Chamber Inlet Fitting
1/2 in. NPT x 12.7 mm tubing

Shaft Outlet
3/8 in. NPT threaded

Bore Sizes Range
From approximately 102 to 305 mm (With optional adapters, sizes from 40 mm to 914 mm)

Recommended Plating Amperage Range
Up to 150 amp

Power Requirements
230 VAC, 1Ø, 50/60 Hz, 3.15 amp


Site created by ThomasNet Web Solutions and Power by Navigator PlatformCopyright © 2012 SIFCO Applied Surface Concepts, LLC. All rights reserved.Privacy     Site Map
SIFCO Applied Surface Concepts