Advancing Selective Plating . . . and Moving Beyond
Search: GO
Request InformationContact UsHome
 
ISO 9001 | AS 9100Nadcap
All Categories > Plating Products and Solutions > Auxiliary Plating Equipment > Traversing Arm > Item # 61003200  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 61003200, Traversing Arm


The SIFCO Process Traversing Arm provides mechanical oscillation or traversing motion for an otherwise manually-moved plating handle. Use of the SIFCO Process Traversing Arm eliminates the need to have an operator move a plating tool, decreasing operator fatigue and freeing him or her to perform other tasks. The mechanical motion control supplied by the Traversing Arm will improve the efficiency of any plating or anodizing operation, and will help to decrease plating cycle time, maximize deposit quality and improve uniformity. The Traversing Arm will accommodate all standard SIFCO Process plating tool handles, providing motion to virtually any size anode which can be attached to the plating tool handle. Speed control and effective length of movement are both easily adjustable for this unit.





Specifications

Drive Unit
248 watt (1/3 hp) permanent magnet DC gearmotor, with variable speed control.

Rotating Speed
Infinitely adjustable, 0-100 percent of motor speed (approximately 0 to 350 oscillations per minute [or rpm])

Linear Speed
Tee Nut set at 25.4 mm (1 inch) Radius
18 m/min at 175 rpm
58.3 ft/min at 175 rpm

Oscillating Speed
Tee Nut set at 25.4 mm (1 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
160.4 ft/min at 175 rpm
49 m/min at 175 rpm

Linear Speed
Tee Nut set at 50.8 mm (2 inch) Radius
116.67 ft/min at 175 rpm
36 m/min at 175 rpm

Oscillating Speed
Tee Nut set at 50.8 mm (2 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
320.7 ft/min at 175 rpm
98 m/min at 175 rpm

Power Requirements
230 VAC, 1Ø, 50/60 Hz, 3 amp


Site created by ThomasNet Web Solutions and Power by Navigator PlatformCopyright © 2012 SIFCO Applied Surface Concepts, LLC. All rights reserved.Privacy     Site Map
SIFCO Applied Surface Concepts