SIFCO Applied Surface Concepts
5708 E. Schaff Rd.
Independence, OH 44131
Phone: 216-524-0099 • Toll-Free: 1-800-765-4131
Email: info@sifcoasc.com
All Categories > Plating Products and Solutions > Auxiliary Plating Equipment > Traversing Arm > Item # 61003120  


Item # 61003120, Traversing Arm

The SIFCO Process Traversing Arm provides mechanical oscillation or traversing motion for an otherwise manually-moved plating handle. Use of the SIFCO Process Traversing Arm eliminates the need to have an operator move a plating tool, decreasing operator fatigue and freeing him or her to perform other tasks. The mechanical motion control supplied by the Traversing Arm will improve the efficiency of any plating or anodizing operation, and will help to decrease plating cycle time, maximize deposit quality and improve uniformity. The Traversing Arm will accommodate all standard SIFCO Process plating tool handles, providing motion to virtually any size anode which can be attached to the plating tool handle. Speed control and effective length of movement are both easily adjustable for this unit.






Specifications

Drive Unit
248 watt (1/3 hp) permanent magnet DC gearmotor, with variable speed control.

Rotating Speed
Infinitely adjustable, 0-100 percent of motor speed (approximately 0 to 350 oscillations per minute [or rpm])

Linear Speed
Tee Nut set at 25.4 mm (1 inch) Radius
10 m/min at 100 rpm
33.3 ft/min at 100 rpm

Oscillating Speed
Tee Nut set at 25.4 mm (1 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
28 m/min at 100 rpm
91.6 ft/min at 100 rpm

Linear Speed
Tee Nut set at 50.8 mm (2 inch) Radius
20 m/min at 100 rpm
66.67 ft/min at 100 rpm

Oscillating Speed
Tee Nut set at 50.8 mm (2 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
183.3 ft/min at 100 rpm
56 m/min at 100 rpm

Power Requirements
115 VAC, 1Ø, 50/60 Hz, 3 amp



Print Back