SIFCO Applied Surface Concepts
5708 E. Schaff Rd.
Independence, OH 44131
Phone: 216-524-0099 • Toll-Free: 1-800-765-4131
Email: info@sifcoasc.com
All Categories > Plating Products and Solutions > Auxiliary Plating Equipment > Traversing Arm > Item # 61003200  


Item # 61003200, Traversing Arm

The SIFCO Process Traversing Arm provides mechanical oscillation or traversing motion for an otherwise manually-moved plating handle. Use of the SIFCO Process Traversing Arm eliminates the need to have an operator move a plating tool, decreasing operator fatigue and freeing him or her to perform other tasks. The mechanical motion control supplied by the Traversing Arm will improve the efficiency of any plating or anodizing operation, and will help to decrease plating cycle time, maximize deposit quality and improve uniformity. The Traversing Arm will accommodate all standard SIFCO Process plating tool handles, providing motion to virtually any size anode which can be attached to the plating tool handle. Speed control and effective length of movement are both easily adjustable for this unit.






Specifications

Drive Unit
248 watt (1/3 hp) permanent magnet DC gearmotor, with variable speed control.

Rotating Speed
Infinitely adjustable, 0-100 percent of motor speed (approximately 0 to 350 oscillations per minute [or rpm])

Linear Speed
Tee Nut set at 25.4 mm (1 inch) Radius
18 m/min at 175 rpm
58.3 ft/min at 175 rpm

Oscillating Speed
Tee Nut set at 25.4 mm (1 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
160.4 ft/min at 175 rpm
49 m/min at 175 rpm

Linear Speed
Tee Nut set at 50.8 mm (2 inch) Radius
116.67 ft/min at 175 rpm
36 m/min at 175 rpm

Oscillating Speed
Tee Nut set at 50.8 mm (2 inch) Radius
Link Arm Length 559 mm (22 inch) Overall
320.7 ft/min at 175 rpm
98 m/min at 175 rpm

Power Requirements
230 VAC, 1Ø, 50/60 Hz, 3 amp



Print Back