Job Shop Plating

Selective Plating Products

All Categories > Plating Products and Solutions > Auxiliary Plating Equipment > Traversing Arm > Item # 61003200  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 61003200, Traversing Arm



The SIFCO Process Traversing Arm provides mechanical oscillation or traversing motion for an otherwise manually-moved plating handle. Use of the SIFCO Process Traversing Arm eliminates the need to have an operator move a plating tool, decreasing operator fatigue and freeing him or her to perform other tasks. The mechanical motion control supplied by the Traversing Arm will improve the efficiency of any plating or anodizing operation, and will help to decrease plating cycle time, maximize deposit quality and improve uniformity. The Traversing Arm will accommodate all standard SIFCO Process plating tool handles, providing motion to virtually any size anode which can be attached to the plating tool handle. Speed control and effective length of movement are both easily adjustable for this unit.





Specifications

Drive Unit

248 watt (1/3 hp) permanent magnet DC gearmotor, with variable speed control.

Rotating Speed

Infinitely adjustable, 0-100 percent of motor speed (approximately 0 to 350 oscillations per minute [or rpm])

Linear Speed
Tee Nut set at 25.4 mm (1 inch) Radius

18 m/min at 175 rpm
58.3 ft/min at 175 rpm

Oscillating Speed
Tee Nut set at 25.4 mm (1 inch) Radius
Link Arm Length 559 mm (22 inch) Overall

49 m/min at 175 rpm
160.4 ft/min at 175 rpm

Linear Speed
Tee Nut set at 50.8 mm (2 inch) Radius

36 m/min at 175 rpm
116.67 ft/min at 175 rpm

Oscillating Speed
Tee Nut set at 50.8 mm (2 inch) Radius
Link Arm Length 559 mm (22 inch) Overall

98 m/min at 175 rpm
320.7 ft/min at 175 rpm

Power Requirements

230 VAC, 1Ø, 50/60 Hz, 3 amp