Drive Unit |
N/A 1/8 hp variable speed, 9 to 94 rpm, full load torque 77 lb-in. |
Leaf Springs (total of six) |
N/A Set 1 - For 4 to 7 in. ID (Designated "S") Set 2 - For 7 to 10 in. ID (Designated "M") Set 3 - For 9 to 12 in. ID (Designated "L") |
Flow Chamber Inlet Fitting |
N/A 1/2 in. MPT x 1/2 in. tubing |
Shaft Outlet |
N/A 3/8 in. FPT threaded |
Bore Sizes Range |
N/A From approximately 4 in. to 12 in. (With optional adapters, sizes from 1.5 in. to 3 ft) |
Recommended Plating Amperage Range |
N/A Up to 150 amp |
Power Requirements |
N/A 115 VAC, 1Ø, 50/60 Hz, 5 amp |
