Drive Unit |
N/A 95 watt variable speed, 3 to 122 rpm full load torque 5.2 Nm |
Leaf Springs (total of six) |
N/A Set 1 - For 102 to 178 mm ID (Designated "S") Set 2 - For 178 to 254 mm ID (Designated "M") Set 3 - For 229 to 305 mm ID (Designated "L") |
Flow Chamber Inlet Fitting |
N/A 1/2 in. NPT x 12.7 mm tubing |
Shaft Outlet |
N/A 3/8 in. NPT threaded |
Bore Sizes Range |
N/A From approximately 102 to 305 mm (With optional adapters, sizes from 40 mm to 914 mm) |
Recommended Plating Amperage Range |
N/A Up to 150 amp |
Power Requirements |
N/A 230 VAC, 1Ø, 50/60 Hz, 3.15 amp |
