• Anode Graphite FT-40
For Flat and OD surfaces using a #75 or #150 handle with or without flow.

SIFCO ASC’s FT plating anodes are ideal for plating on flat surfaces. All graphite anodes are prepared from high-purity graphite having less than 20 ppm iron. Our flat plating anodes can be used on casings, electrical bus connecters and housings and cabinets. Please contact our Technical Service Department for more information.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Item Name

Length

Width

Height

N/A Anode Graphite FT-40 N/A 1 9/16 in40 mm N/A 1 in25 mm N/A 1 in25 mm
N/A Anode Graphite FT-60 N/A 2 3/8 in60 mm N/A 1 9/16 in40 mm N/A 1 in25 mm
N/A Anode Graphite FT-75 N/A 3 in75 mm N/A 2 in50 mm N/A 1 in25 mm
N/A Anode Graphite FT-125 N/A 4 15/16 in125 mm N/A 1 in25 mm N/A 1 in25 mm
N/A Anode Graphite FT-65 N/A 2 9/16 in65 mm N/A 2 9/16 in65 mm N/A 1 in25 mm
N/A Anode Graphite FT-90 N/A 3 17/32 in90 mm N/A 3 17/32 in90 mm N/A 1 in25 mm
N/A Anode Graphite FT-115 N/A 4 17/32 in115 mm N/A 4 17/32 in115 mm N/A 1 in25 mm
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1