Advancing Selective Plating . . . and Moving Beyond
Search: GO
Request InformationContact UsHome
 
ISO 9001 | AS 9100Nadcap
All Categories > Plating Products and Solutions > Plating Anodes and Anode Materials > ID Plating Anodes > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

ID Plating Anodes

 
Check up to five results to perform an action.

For Internal Diameters or Flat Surfaces. ID Plating Anodes can be used with #75 Handle or #150 Handle with or without Flow

All of SIFCO ASC’s ID plating anodes are prepared from high-purity graphite, with less than 20 ppm iron. Our Inside Diameter anodes are commonly used in the automotive, electric motor and mining industries. Ideal for pumps, cylinders and couplings, a range of deposits can be used. Get in touch with our Technical Service Department for more information.



Compare Items
   
  Results 1 - 13 of 13 1 

Item #

Item Name

Outside Dimension

Length
13001005 Anode Graphite ID-5 3/16 in
4.8 mm 		2 5/8 in
66 mm
13001006 Anode Graphite ID-6 1/4 in
6.4 mm 		2 5/8 in
66 mm
13001008 Anode Graphite ID-8 5/16 in
7.9 mm 		2 5/8 in
66 mm
13001010 Anode Graphite ID-10 3/8 in
9.5 mm 		3 3/8 in
86 mm
13001013 Anode Graphite ID-13 1/2 in
12.7 mm 		3 3/8 in
86 mm
13002019 Anode Graphite ID-19F 3/4 in
19 mm 		4 in
100 mm
13002025 Anode Graphite ID-25F 1 in
25 mm 		4 in
100 mm
13002032 Anode Graphite ID-32F 1 1/4 in
32 mm 		4 in
100 mm
13002038 Anode Graphite ID-38F 1 1/2 in
38 mm 		4 in
100 mm
13002050 Anode Graphite ID-50F 2 in
50 mm 		4 in
100 mm
13002063 Anode Graphite ID-63F 2 1/2 in
63 mm 		4 in
100 mm
13002075 Anode Graphite ID-75F 3 in
75 mm 		4 in
100 mm
13002100 Anode Graphite ID-100F 4 in
100 mm 		4 in
100 mm
  Results 1 - 13 of 13 1 
Site created by ThomasNet Web Solutions and Power by Navigator PlatformCopyright © 2012 SIFCO Applied Surface Concepts, LLC. All rights reserved.Privacy     Site Map
SIFCO Applied Surface Concepts